![](/wp-content/uploads/2016/03/scelogo.png)
Saginaw Control and Engineering
95 Midland Road Saginaw, MI 48638-5770
(800) 234-6871 - Fax: (989) 799-4524
SCE@SaginawControl.com
SCE-726024FSDAD
![SCE-726024FSDAD SCE-726024FSDAD](/images/sce-726024fsdad.png)
Product Specifications:
Part Number: SCE-726024FSDAD
Description: FSDAD Enclosure
Height: 72.00"
Width: 60.00"
Depth: 24.00"
Price Code: A2
List Price: $3,441.04
Catalog Page: 142
Est. Ship Weight: 545.00 lbs
Construction
- 0.104 In. carbon steel.
- Two-Door Dual Access.
- Seams continuously welded and ground smooth.
- Lifting eyes for easy handling.
- Black zinc die cast keylocking/padlocking handle.
- 3-point latching mechanism.
- Latch rods have ramp shoes for easier door closing.
- Concealed hinges.
- Flange trough collar around all sides of door opening.
- Removable print pocket provided on door with 3-point latch.
- Mounting channels welded horizontally on sides of interior body at top, bottom and middle for mounting optional panels or rack mounting angles.
- Pour in place oil & water resistant gasket
- Ground stud on door and body.
- Removable and interchangeable doors.
- Provisions for light kit.
Application
Designed to house a variety of electrical and electronic controls and instruments. Provisions for optional surface mounting or rack mounting of almost any type of equipment. Provides protection from dust, dirt, water and oil. For outdoor application a drip shield and drain vent is recommended.
For Details about the design, performance expectations, applications and design suggestions - See Design Considerations www.saginawcontrol.com/instman/considerations.pdf
Finish
ANSI-61 gray finish inside and out. Optional sub-panels are powder coated white.
Industry Standards - (IS3)
- NEMA Type 3R, 12 and Type 13
- UL Listed Type 3R and 12
- CSA Type 3R and 12
- IEC 60529
- IP 55
Notes
Special Instructions apply for IS3, IS4 and IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door. Drip shield is required on IS3, drip shield is recommended on IS4 and IS6. Drain holes are required on all.
Optional Accessories
![SCE-7230SOF19 SCE-7230SOF19](/images/sce-7230sof19.png)
SCE-7230SOF19
Frame, Swing Out Rack Mounting
![SCE-72FSHDPS SCE-72FSHDPS](/images/sce-72fshdps.png)
SCE-72FSHDPS
Panel Support Heavy Duty
![SCE-72P30F1 SCE-72P30F1](/images/sce-72p30f1.png)
SCE-72P30F1
Subpanel, Full
![SCE-72P30F1GALV SCE-72P30F1GALV](/images/sce-72p30f1galv.png)
SCE-72P30F1GALV
Subpanel, Full Galvanized
![SCE-72P30F2 SCE-72P30F2](/images/sce-72p30f2.png)
SCE-72P30F2
Subpanel, Half
![SCE-72RA24TH SCE-72RA24TH](/images/sce-72ra24th.png)
SCE-72RA24TH
Angle, Rack
![SCE-72RP30F5 SCE-72RP30F5](/images/sce-72rp30f5.png)
SCE-72RP30F5
Angle, Rack
![SCE-72RP30F6 SCE-72RP30F6](/images/sce-72rp30f6.png)
SCE-72RP30F6
Angle, Rack
![SCE-72SP30F3 SCE-72SP30F3](/images/sce-72sp30f3.png)
SCE-72SP30F3
Panel, Swingout Full
![SCE-72SP30F4 SCE-72SP30F4](/images/sce-72sp30f4.png)
SCE-72SP30F4
Panel, Swingout Half
Similar Part Numbers
Installation Information
- Drip Shield Kit Assembly
- Folding Shelf Hole Pattern
- Center Panel Support Assembly
- Heavy Duty Panel Supports - In Two Door FS Enclosure
- Rack Mounting Angles
- Removable Wire Cover
- Swing-Out Full Panel
- Swing-Out Half Panel
- Swing-Out Rack Mounting Frame
- LED Light Fixture
- Hole Seal
- Free-Standing Two-Door Dual Access Accessories
- Service Parts Free Standing & Floor Mount Enclosures